10 Lock For Double Glazed Door Related Projects To Expand Your Creativity

10 Lock For Double Glazed Door Related Projects To Expand Your Creativity

How to Choose a Smart Lock For Double Glazed Door

If you're searching for an intelligent lock designed for double doors, it's important to select one that meets the highest security standards. This includes being SS312 Diamond-approved or at a minimum Kitemarked to TS007 3 Star, which will prevent the lock from snapping.

Before deciding on a smartlock make sure your doors have been pre-drilled with boreholes. You may have to install a hinge bolt or another additional security measure if you don't.

uPVC Door Locks

The euro cylinder lock is typically found in the handles of uPVC door frames. It connects with a multi-locking system. Many older or cheaper uPVC doors come with standard cylinder locks that can be easily'snapped,' rendering the multi-locking system unusable and allowing burglars to gain access to your home. Higher-quality uPVC doors should have a euro cylinder that is anti-snap and more difficult to tamper.

Multipoint locks are a common choice for uPVC doors because they provide more security than the single cylinder. They typically are long and have several locking points on the frame and door to prevent burglars from gaining access through the unlocked side.

If you're in the market for an multipoint locking system for your uPVC doors, be certain to select one that is approved according to the most stringent standards of security. The most secure locks are ones that have been inspected to SS312 Diamond or at a minimum Kitemarked according to TS007-3-Star. Both of these standards include tests to ensure that the lock is safe from snapping.

WD40 can extend the life of your uPVC locks and prevent them from becoming stiff. It also stops the handle from slipping when you use it. This could indicate an issue with the springs inside that will need to be repaired, or that you are using too much force when locking the doors.

If you need to replace your uPVC locks, it is recommended that you contact an experienced locksmith that specializes in uPVC lock replacement. They will be able to advise you on which lock is best for your door, and give you a competitive estimate. They can also change your handles and repair any broken panels if necessary.

A professional uPVC lock replacer will charge between PS35 and 50. They will offer a comprehensive service that is quick efficient, and executed to the highest quality. If they have to rekey locks or fix any windows that have been broken into, this is an additional cost.

uPVC Euro Cylinder Locks

Cylinder locks (also known as door barrels) are used in uPVC doors and are connected to the multi-point locking system within the door frame. They are also utilized in internal glazed doors as well as conservatories. These types of locks offer a good security level, however they are susceptible to attacks such as lock snapping and bumping. This is why it's important to always double lock your uPVC doors before going to bed or leaving your home.

Before you purchase, it is important to determine which cylinder lock is best suited to your requirements. For example, you should consider the frequency you lock your uPVC door and if you'd like a keyed-along system in which all your doors can be opened with the same key.



The euro cylinder is the most common type of cylinder. It is found on the majority of uPVC door. They are usually made of brass and are available in a variety of sizes that will fit the majority of doors, with the largest models being typically used for back and front doors on larger properties.

When selecting a euro cylinder, it is crucial to confirm that it has been tested according to the proper kitemark standards - they are SS312 Diamond Approved, or TS 007 3 star and provide protection against Drilling, Picking Bumping and Snapping.

Cylinder locks come in a variety of lengths, and some are able to be offset, meaning that they are only locked from the inside when they are moved to a closed position by turning the handle upwards.  replace window lock  is also essential to consider how much you're willing to pay on your uPVC door locks because the cost will vary based on the level of security that you require and the features you want for your new cylinder to include.

When replacing a cylinder lock it is essential to measure up your door to ensure that the new lock will fit in the right way. To do this, locate the cylinder screw that is typically a large-headed screw that is located in line with the lower end cylinder, and remove it. Next you will need to locate the cylinder on the door and take a measurement from the edge of the lock face to the center of the screw hole, this is your measurement A. Measure from the edge of your door to the center including furniture. This is your measurement B. Make sure that A and B equal each other to be sure you have measured accurately.

uPVC Multipoint Locks

The most secure lock for your uPVC or composite door is a multipoint locking system, which are long strip locks that run the length of the door. They are equipped with multiple bolts and hooks that lock into place when the handle is operated. These locks provide greater security for your home and come in various styles to suit any style or type of door. uPVC multipoint locks are the type of lock that you will see on the majority of new uPVC doors, as well as on the majority of wood and composite doors.

Unlike Euro Cylinder locks which are susceptible to snapping locks, the multipoint lock is designed to resist this type of attack. The locking points of a multipoint lock are connected to a bar made of steel, which stops the hooks from moving, without taking the key out.

The majority of new uPVC and composite doors will have an anti-snap multipoint lock included as standard, however If you're worried that yours might not, then you should have it checked by your local locksmith. You can tell the lock by opening the door and looking at the metal strip that runs the length of the door. The most popular manufacturers are ERA, Avocet Fuhr, or Mila.

You'll have to use a lever lever on the lock or turn the key several times to engage the locking points, this is called winding up the lock. Once all the locking points are engaged you can then open and close the door by turning the handle and use the key to deadlock it - this throws out the deadbolt located in the central gearbox. It is the most secure locking mechanism.

It is best to purchase your uPVC front door lock from a business that has a specialization in doors and window products. These locks are crucial for the security of your home and family. The purchase of a cheap replacement multipoint lock can be a false economy if the locks and security quality of your new doors aren't meeting the standards required. This will not only put your family in danger but could also impact the cost of insurance.

uPVC Rim Locks

There are several kinds of uPVC Rim locks. The basic one is just one that slams shut, when you close the door, it will automatically lock but you can also get one that requires you to manually lock with the key prior to leaving the house. These locks are not capable of being opened and are among the most secure options you can install on your door. These locks are suitable for timber or wooden doors on homes for domestic use, and glass panelled door for commercial buildings. You can even have these locks certified to the latest British standard BS3621, so that your insurance company can give you an additional discount on your premium.

The multi-point locks used on uPVC and composite doors are extremely secure and provide the best level of security for your home. These locks have multiple locking points so that if you attempt to force the handle open it will not turn. The locks are designed to make it difficult for burglars to get access to the handles, so they won't be able to retract from the outside.

You can also have these locks with a mortice sashlock to provide extra protection from people breaking in through the window. They are an excellent option for doors that lead into outbuildings or gardens since they can provide additional protection from thieves who are able to climb through the window to gain access.

If you own a uPVC or composite door and are concerned about the problem of snapping cylinders, we can install an anti-snap lock to stop this from happening. We use these on our own composite doors and are the only uPVC installers in Belvedere that can offer this.

We can change your locks out of hours since we have a mobile van that can visit your home. It's a little more expensive cost than when we are working during the daytime, but it's worth it for the ease and security of having your uPVC doors locked out of hours.